Looking for an air source heat pump Bristol installer? We can help. GetASHP matches homes across Bristol with vetted, MCS-certified installers. Tell us about your home in 60 seconds. A local installer will then survey it and design the right system. You get a fixed quote with the £7,500 government grant already taken off.
Heat pumps for Bristol homes
Bristol's Georgian and Victorian terraces, hillside homes and modern estates all have heat pump options. The city has strong demand for low-carbon heating and a mild climate that helps heat pumps run efficiently year round.
Local tip: Steep or terraced gardens can complicate siting. A wall-mounted bracket is often the neat solution.
Why choose an air source heat pump in Bristol?
- Renewable heating: it takes free heat from the air. It cuts heating emissions by about 70% compared with gas.
- High-efficiency heating: modern heat pump systems give 3 to 4 units of heat for each unit of electricity. A gas boiler gives about 0.9.
- Radiators and hot water: it heats your radiators (or underfloor heating) and a hot water cylinder. It replaces your boiler completely.
- Lower bills off the gas grid: homes on oil, LPG or storage heaters save the most.
- Smaller carbon footprint and lower energy bills: renewable energy from the air replaces fossil fuel. Efficient heat means you buy less energy.
- Works with solar panels: a solar panel system can power your heat pump in the day.
- A long life: around 20 years with an annual service.
Air source is the best renewables heating choice for most Bristol homes. Ground source heat pumps suit homes with lots of land. They cost far more to fit; see ground source vs air source.
The £7,500 Boiler Upgrade Scheme (BUS) grant in Bristol
Homeowners, landlords and small businesses in Bristol can get a £7,500 government grant. It comes from the Boiler Upgrade Scheme (BUS). It is not means-tested. Your installer applies for you and takes it off your quote. Heat pumps also have 0% VAT until 31 March 2027. You are likely to qualify if:
- you own the property in Bristol (or are the landlord);
- you're replacing a gas, oil, LPG or direct electric heating system;
- the property has a valid Energy Performance Certificate;
- the heat pump is installed by an MCS-certified installer.
Air source heat pump cost in Bristol
Prices in Bristol are close to the UK average. These are typical prices. They include the heat pump, cylinder, controls and labour:
| Bristol home | Typical size | Installed cost | After £7,500 grant |
|---|---|---|---|
| 1 to 2 bed flat or terrace | 4 to 6 kW | £8,000 to £11,000 | £500 to £3,500 |
| 3 bed semi-detached | 6 to 8 kW | £10,000 to £13,000 | £2,500 to £5,500 |
| 4 bed detached | 8 to 11 kW | £12,000 to £16,000 | £4,500 to £8,500 |
A typical three-bed home costs about £1.40 to £2.40 a day to heat. It depends on your tariff. See the full cost guide and daily running costs.
How heat pumps perform in Bristol's climate
Bristol has one of the mildest climates in England, with winters that rarely bring prolonged hard frosts: ideal conditions for heat pump efficiency. Heat pumps work down to about -20°C. A Bristol winter is well within that. Read more: do air source heat pumps work in winter?
Air source heat pump installation in Bristol
- Check your eligibility with our 60-second form.
- Free home survey by a local MCS-certified installer. They check the heat loss of every room.
- Design and fixed quote: the heat pump is sized for your home. Any radiator changes are listed. The grant is already taken off.
- Installation in 2 to 4 days. The installer handles MCS and BUS paperwork, so design and installation are hassle-free.
- Handover: your installer shows you how to get the best from the controls.
See what to expect on installation day.
Fully qualified Bristol heat pump installers
Every installer we work with in Bristol is fully qualified and MCS-certified. This is often called MCS accredited. They work to MCS industry standards. They also belong to a consumer code, such as RECC or HIES, which protects your deposit. Your written quote shows the heat loss, unit size, expected efficiency (SCOP) and any radiator changes.
Heat pump servicing: keeping your system running well
A heat pump needs very little care. Book heat pump servicing once a year. The engineer checks the refrigerant, cleans the filters and coil, and checks the controls. This keeps the system running well and your warranty valid. Your installer can arrange it.
Areas we cover in and around Bristol
Our installer partners cover Bristol and surrounding areas, including Clifton, Redland, Bishopston, Southville, Bedminster, Fishponds, Henleaze, Keynsham, Portishead and Thornbury, and BS1 to BS49 postcodes. Enter your postcode and we'll confirm we cover you.
Also covered: air source heat pumps in London, air source heat pumps in Birmingham, air source heat pumps in Manchester, air source heat pumps in Leeds, air source heat pumps in Sheffield, air source heat pumps in Liverpool and more areas.
Sources
Grant amounts, VAT rules and eligibility are set by government and the scheme administrators. We check them against these primary sources:
- Apply for the Boiler Upgrade Scheme (GOV.UK)
- Boiler Upgrade Scheme (BUS) (Ofgem)
- VAT on energy-saving materials and heating equipment (VAT Notice 708/6) (GOV.UK)
- Find an MCS certified installer (MCS)
- Heat pumps: planning permission (Planning Portal)
New to the jargon? See the heat pump glossary, or browse the heat pump FAQs.